White Mountain Mini-SplitsDuctless heat & air · White Mountains, AZ

Pinetop-Lakeside · Show Low · Heber-Overgaard · Snowflake · Lakeside

Real heat. Real AC. No ductwork.

Ductless mini-splits are made for White Mountains cabins — one system that cools your summers and heats through a Pinetop winter, room by room, without tearing into walls for ducts.

White Mountain Mini-Splits connects cabin owners with licensed local HVAC contractors. All installations are performed by those licensed contractors — not by White Mountain Mini-Splits.

  • Cold-climate systems rated to keep heating at 5°F and below
  • Installed by licensed, ROC-verified local HVAC contractors
  • Most single-room installs finished in one day
Log cabin among ponderosa pines in Pinetop-Lakeside, Arizona
$3,000–$5,000Single room, typical
$6,500–$15,000+Whole cabin, multi-zone
Installations by licensed local HVAC contractors Free, no-pressure quotes Absentee-owner friendly — handled by form & photos Serving Navajo & Apache counties

Why mini-splits up here

Built for cabins that ducts forgot

Most White Mountains cabins were built for a wood stove and open windows. A mini-split adds modern comfort without a duct system, a furnace room, or a major remodel.

5°F

Heats in a real mountain winter

Cold-climate models like Mitsubishi Hyper-Heat and Fujitsu XLTH hold full heating power down to 5°F and keep running to −13°F. The cheap units that quit at 30°F don't belong in Pinetop — cold-climate models are the right spec up here.

1 day

No ducts, no remodel

An indoor head, a small outdoor unit, and a 3-inch hole for the line set. No ductwork through your attic or crawlspace, and most single-zone installs are done in a day.

Room by room

Heat the rooms you use

Each head is its own zone with its own remote. Keep the living room at 70°, the spare bedroom at 55°, and stop paying to heat an empty cabin all week.

Heat + AC

One system, both seasons

A mini-split is a heat pump — it cools in July and heats in January. Retire the window units and the swamp cooler, and take the edge off winter without running the wood stove around the clock.

How it works

You fill out one form. We handle the rest.

You don't need to be at the cabin, and you don't need to call three contractors and compare apples to oranges. Here's the whole process:

1

Request a quote

Open the quote request form and tell us about the cabin — rooms, sizes, what you heat with now, and photos. Ten minutes, from anywhere.

2

Get a real quote

Your details go to a licensed local HVAC contractor, who sizes the system and sends you a written quote — equipment, install, and warranty, in writing.

3

The contractor installs it

The licensed HVAC contractor signs the agreement with you directly and performs the installation — usually one day for a single zone. Permits and electrical are handled by licensed pros.

4

Finished-job check

After the install, the finished job gets a walkthrough check — unit placement, line set, drain, and a test run — with photos sent to you.

Honest price ranges

What a mini-split costs in the White Mountains

Real installed ranges for 2026 — equipment, labor, line set, and electrical hookup. Your written quote is exact before anyone picks up a tool.

One room

Single-Zone

$2,500–$6,000

Typical cabin jobs land at $3,000–$5,000

  • One indoor head + one outdoor unit
  • Living room, primary bedroom, or addition
  • Usually installed in one day
Request a quote

Whole cabin · 4–5 rooms

Whole-Home

$10,000–$15,000+

Full comfort, every room, one project

  • 4–5 heads on one or two outdoor units
  • Replaces window units & space heaters entirely
  • Strong selling point for rentals & resale
Request a quote

Ranges are installed totals from local contractor pricing, not equipment-only prices. Final price depends on system size, brand, electrical panel condition, and line-set distance. Note: the federal heat-pump tax credit ended after 2025, so it's not part of these numbers — anyone who quotes you a price "after the credit" is working from old information.

Quick sizing guide

Mountain heating needs more capacity than the desert charts allow — roughly 20–30 BTU per square foot up here. Your contractor confirms the final size with a load calculation.

Room sizeSystem sizeTypical fit
Up to ~300 sq ft9,000 BTUSmall bedroom, office, bunk room
~300–550 sq ft12,000 BTU (1 ton)Primary bedroom, small living room
~550–800 sq ft18,000 BTUOpen living / kitchen great room
~800–1,100 sq ft24,000 BTULarge great room, loft, open-plan main floor

Undersized is the #1 mistake in the mountains — a unit that's fine in Phoenix will fall behind on a January night in Pinetop. Oversized isn't free either: it short-cycles and never pulls the humidity out in summer.

What you're looking at

Two units. One small hole in the wall.

Wall-mounted ductless mini-split indoor unit above a living room sofa

Inside: the head

A quiet wall-mounted unit — about as loud as a whisper on low — with its own remote and thermostat. One head per zone. Ceiling cassettes and floor units are options where wall space is tight.

Mini-split outdoor condenser unit on a pad beside a house, with electrical disconnect

Outside: the condenser

One compact outdoor unit can run up to 5–8 heads. Up here it goes on a raised pad or wall bracket — above the snow line, not sitting in a drift — with a dedicated 240V circuit and disconnect, like the one pictured.

Brands built for mountain cold

Mitsubishi

Hyper-Heat models are the cold-climate benchmark — full heat at 5°F, running to −13°F. Up to a 12-year parts warranty when installed by a certified contractor.

Premium · cold-climate

Fujitsu

XLTH series matches Mitsubishi step for step in the cold, often at a slightly friendlier price. A long track record in northern climates.

Premium · cold-climate

Daikin & LG

Solid mid-tier systems with good cold-weather lines and wide dealer support. A sensible fit when the budget matters more than the last degree of low-temperature output.

Mid-tier · good value

Who does the work? White Mountain Mini-Splits is a service brand that helps cabin owners plan a mini-split project and connects them with licensed local HVAC contractors. White Mountain Mini-Splits does not install mini-splits. All installations are performed by licensed local HVAC contractors, who quote the job, sign the agreement with you directly, perform the work, and stand behind the installation warranty.

Free quote

Request a quote

One short form is all it takes. It gathers everything a licensed contractor needs to size and price your system — so you get a real written quote, not a ballpark that changes later.

The form asks for:

  • Your name and the best way to reach you
  • The cabin's address and town
  • Which rooms need heating and cooling, and roughly how big they are
  • What you heat and cool with now — wood stove, baseboard, window units, swamp cooler, or nothing
  • Photos of the rooms, your electrical panel, and the outside wall where the outdoor unit could go
  • Your panel size if you know it (100A or 200A), and when you'd like the work done

Ready when you are

The form opens in a new tab and takes about ten minutes. A licensed local HVAC contractor reviews your answers and follows up with a written quote. No obligation, and no one shows up unannounced.

Request a quote — open the form

Not at the cabin? That's fine — most owners complete the form from home with photos from their last visit, and the contractor confirms the details before quoting.

Common questions

Before you ask for a quote

Who actually installs the mini-split?
A licensed local HVAC contractor — not White Mountain Mini-Splits. White Mountain Mini-Splits is the brand that helps you plan the project and gathers the information the contractor needs. The contractor quotes the job, signs the agreement with you directly, performs the installation, and provides the installation warranty. Equipment warranties come from the manufacturer.
Will a mini-split really heat my cabin in January?
Yes — if it's a cold-climate model. Systems like Mitsubishi Hyper-Heat and Fujitsu XLTH deliver full heating output at 5°F and keep operating down to about −13°F, which covers Pinetop-Lakeside and Show Low winters. Standard models that lose capacity below 30°F are not a good fit up here, and your contractor's quote should specify a cold-climate system.
Do I need to be at the cabin for a quote?
Usually not. The quote request form collects your room sizes, current heating and cooling, and photos of the rooms, electrical panel, and outdoor unit location. In most cases that's enough for a written quote. If the contractor needs to see something in person, they'll arrange access with you first.
How long does an install take?
A single-zone system is typically a one-day install. Multi-zone and whole-cabin systems usually take one to two days. The contractor confirms the schedule in writing before work begins.
What if my electrical panel is old or full?
That's common in older cabins, and it's exactly why the form asks for a photo of your panel with the door open. A mini-split needs a dedicated 240V circuit. If your panel needs an upgrade or added space, the contractor includes that in the quote up front — no surprises mid-job.
How much does it cost?
Installed totals in the White Mountains typically run $2,500–$6,000 for a single room, $6,500–$10,000 for two to three rooms, and $10,000–$15,000 or more for a whole cabin. Your exact price depends on system size, brand, panel condition, and line-set distance — the written quote spells it all out before any work starts.
Is there still a tax credit for heat pumps?
The federal heat-pump tax credit ended after 2025, so it isn't part of current pricing. If another installer quotes you a lower price "after the credit," ask them to show you the credit in writing.

Comfortable cabin, next visit and every visit after.

Tell us about the cabin once, and a licensed local HVAC contractor takes it from there — written quote, direct agreement, professional install.

Request a quote